Número:
Amplificador de potencia profesional de doble canal serie YingQi.2 (700 W - 2600 W) YingQi2 7---YingQi-2 26
Precio de venta al público
Precio de mercado
Palabra clave:
Peso
Inventario
隐藏域元素占位
- Descripción del producto
-
Output Power Stereo (RMS):
2 x 700W @ 8ohm,
2 x 1150W @ 4ohm,
2 x 1730W @ 2ohm
Bridge Mode (RMS) Output Power:
1400W @ 16ohm，
2300W @ 8ohm，
3000W @ 4ohm
Frequency Response: 10Hz - 20KHz / ±0.35dB
THD+N (20Hz-20KHz) Total Harmonic Distortion + Noise: ≤0.5% @ 8Ω1kHz
S/N Rate (20Hz -20 kHz) Signal-to-Noise Ratio: >99dB
Crosstalk (1KHz) Channel Isolation: >70dB
Slew Rate: >30v/μs
Damping Factor: >5000 (8Ohm) 20Hz to 100Hz
Voltage Gain: 39.7dB (0,775V:75V)
Input Sensitivity: 0.775V,1V,1.4V,2V
Input Impedance: 10K Ω balance/ 20K Ω unbalance
Input Connectors: XLR Active balanced pin1 gnd/pin 2+/pin3-
Output Connectors: 2 Neutrik NL4 Sockets / 2 input posts
Protection: short-circuit, DC, overload, overheat, ultrasonic, RF, voltage peak limit,
Operating Voltage: 110V/220V available
Fuse: F-12A
Power consumption (Idle): <80W
Power consumption (Max): <1000W
Circuit: Class D
Dimensions (L×W×D): 483mm×420mm×45mm (1U)
Package (L×W×D): 580mm×478mm×73mm
Net Weight: 7KG
Gross Weight: 8.1kgModel: YingQi-2.9
Output Power Stereo (RMS):
2 x 900W @ 8ohm
2 x 1500W @ 4ohm
2 x 2200W @ 2ohm
Bridge Mode (RMS) Output Power:
1800W @ 16ohm
3000W @ 8ohm
4000W @ 4ohm
Frequency Response: 10Hz - 20KHz / ±0.35dB
THD+N (20Hz-20KHz) Total Harmonic Distortion + Noise: ≤0.5% @ 8Ω1kHz
S/N Rate (20Hz -20 kHz) Signal-to-Noise Ratio: >99dB
Crosstalk (1KHz) Channel Isolation: >70dB
Slew Rate: >30v/μs
Damping Factor: >5000 (8Ohm) 20Hz to 100Hz
Voltage Gain: 40.8dB (0,775V:85V)
Input Sensitivity: 0.775V,1V,1.4V,2V
Input Impedance: 10K Ω balance/ 20K Ω unbalance
Input Connectors: XLR Active balanced pin1 gnd/pin 2+/pin3-
Output Connectors: 2 Neutrik NL4 Sockets / 2 input posts
Protection: short-circuit, DC, overload, overheat, ultrasonic, RF, voltage peak limit,
Operating Voltage: 110V/220V available
Fuse: F-15A
Power consumption (Idle): <90W
Power consumption (Max): <1500W
Circuit: Class D
Dimensions (L×W×D): 483mm×420mm×45mm (1U)
Package (L×W×D): 580mm×478mm×73mm
Net Weight: 7KG
Gross Weight: 8.1kgModel: YingQi2.11
Output Power Stereo (RMS):
2 x 1100W @ 8ohm
2 x 1830W @ 4ohm
2 x 2700W @ 2ohm
Bridge Mode (RMS) Output Power:
2200W @ 16ohm
3660W @ 8ohm
5000W @ 4ohm
Frequency Response: 10Hz - 20KHz / ±0.35dB
THD+N (20Hz-20KHz) Total Harmonic Distortion + Noise: ≤0.5% @ 8Ω1kHz
S/N Rate (20Hz -20 kHz) Signal-to-Noise Ratio: >99dB
Crosstalk (1KHz) Channel Isolation (1KHz): >70dB
Slew Rate: >30v/μs
Damping Factor: >5000 (8Ohm) 20Hz to 100Hz
Voltage Gain: 41.7dB (0,775V:94V)
Input Sensitivity: 0.775V,1V,1.4V,2V
Input Impedance: 10K Ω balance/ 20K Ω unbalance
Input Connectors: XLR Active balanced pin1 gnd/pin 2+/pin3-
Output Connectors: 2 Neutrik NL4 Sockets / 2 input posts
Protection: short-circuit, DC, overload, overheat, ultrasonic, RF, voltage peak limit,
Operating Voltage: 110V/220V available
Fuse: F-20A
Power consumption (Idle): <95W
Power consumption (Max): <2000W
Circuit: Class D
Dimensions (L×W×D): 483mm×420mm×45mm (1U)
Package (L×W×D): 580mm×478mm×73mm
Net Weight: 7.2KG
Gross Weight: 8.3kg
Model：YingQi2.13
Output Power Stereo (RMS):
2 x 1300W @ 8ohm
2 x 2150W @ 4ohm
2 x 3200W @ 2ohm
Bridge Mode (RMS) Output Power:
2600W @ 16ohm
4300W @ 8ohm
6000W @ 4ohm
Frequency Response: 10Hz - 20KHz / ±0.35dB
THD+N (20Hz-20KHz) Total Harmonic Distortion + Noise: ≤0.5% @ 8Ω1kHz
S/N Rate (20Hz -20 kHz) Signal-to-Noise Ratio: >99dB
Crosstalk (1KHz) Channel Isolation (1KHz): >70dB
Slew Rate: >30v/μs
Damping Factor: >5000 (8Ohm) 20Hz to 100Hz
Voltage Gain: 42.5dB (0,775V:103V)
Input Sensitivity: 0.775V,1V,1.4V,2V
Input Impedance: 10K Ω balance/ 20K Ω unbalance
Input Connectors: XLR Active balanced pin1 gnd/pin 2+/pin3-
Output Connectors: 2 Neutrik NL4 Sockets / 2 input posts
Protection: short-circuit, DC, overload, overheat, ultrasonic, RF, voltage peak limit,
Operating Voltage: 110V/220V available
Fuse: F-25A
Power consumption (Idle): <100W
Power consumption (Max): <2500W
Circuit: Class D
Dimensions (L×W×D): 483mm×420mm×45mm (1U)
Package (L×W×D): 580mm×478mm×73mm
Net Weight: 7.2KG
Gross Weight: 8.3kg
Model：YingQi2.16
Output Power Stereo (RMS):
2 x 1600W @ 8ohm
2 x 2650W @ 4ohm
2 x 3950W @ 2ohm
Bridge Mode (RMS) Output Power:
3200W @ 16ohm
5300W @ 8ohm
7000W @ 4ohm
Frequency Response: 10Hz - 20KHz / ±0.35dB
THD+N (20Hz-20KHz) Total Harmonic Distortion + Noise: ≤0.5% @ 8Ω1kHz
S/N Rate (20Hz -20 kHz) Signal-to-Noise Ratio: >99dB
Crosstalk (1KHz) Channel Isolation (1KHz): >70dB
Slew Rate: >30v/μs
Damping Factor: >5000 (8Ohm) 20Hz to 100Hz
Ganancia de voltaje: 43.3dB (0,775V:113V)
Input Sensitivity: 0.775V,1V,1.4V,2V
Input Impedance: 10K Ω balance/ 20K Ω unbalance
Input Connectors: XLR Active balanced pin1 gnd/pin 2+/pin3-
Output Connectors: 2 Neutrik NL4 Sockets / 2 input posts
Protection: short-circuit, DC, overload, overheat, ultrasonic, RF, voltage peak limit,
Operating Voltage: 110V/220V available
Fuse: F-25A
Consumo de energía (En reposo): <107W
Consumo de energía (Máximo): <3000W
Circuit: Class D
Dimensions (L×W×D): 483mm×420mm×45mm (1U)
Package (L×W×D): 580mm×478mm×73mm
Peso neto: 7.3kg
Peso bruto: 8.4kg
Modelo: YingQi2.20
Potencia de salida estéreo (RMS): 2 x 2000W @ 8ohm
2 x 3300W @ 4ohm
2 x 5000W @ 2ohm
Frequency Response: 10Hz - 20KHz / ±0.35dB
THD+N (20Hz-20KHz) Total Harmonic Distortion + Noise: ≤0.5% @ 8Ω1kHz
S/N Rate (20Hz -20 kHz) Signal-to-Noise Ratio: >99dB
Crosstalk (1KHz) Channel Isolation (1KHz): >70dB
Slew Rate: >30v/μs
Damping Factor: >5000 (8Ohm) 20Hz to 100Hz
Ganancia de voltaje: 44.3dB (0,775V:127V)
Input Sensitivity: 0.775V,1V,1.4V,2V
Input Impedance: 10K Ω balance/ 20K Ω unbalance
Input Connectors: XLR Active balanced pin1 gnd/pin 2+/pin3-
Output Connectors: 2 Neutrik NL4 Sockets / 2 input posts
Protection: short-circuit, DC, overload, overheat, ultrasonic, RF, voltage peak limit,
Operating Voltage: 110V/220V available
Fusible: F-30A
Consumo de energía (En reposo): <155W
Consumo de energía (Máximo): <4500W
Circuit: Class D
Dimensions (L×W×D): 483mm×420mm×45mm (1U)
Package (L×W×D): 580mm×478mm×73mm
Peso neto: 8.3kg
Peso bruto: 9.6kg
Modelo: YingQi2.26
Potencia de salida estéreo (RMS): 2 x 2600W @ 8ohm
2 x 4300W @ 4ohm
2 x 6500W @ 2ohm
Frequency Response: 10Hz - 20KHz / ±0.35dB
THD+N (20Hz-20KHz) Total Harmonic Distortion + Noise: ≤0.5% @ 8Ω1kHz
S/N Rate (20Hz -20 kHz) Signal-to-Noise Ratio: >99dB
Crosstalk (1KHz) Channel Isolation (1KHz): >70dB
Slew Rate: >30v/μs
Damping Factor: >5000 (8Ohm) 20Hz to 100Hz
Ganancia de voltaje: 45.4dB (0,775V:144V)
Input Sensitivity: 0.775V,1V,1.4V,2V
Input Impedance: 10K Ω balance/ 20K Ω unbalance
Input Connectors: XLR Active balanced pin1 gnd/pin 2+/pin3-
Output Connectors: 2 Neutrik NL4 Sockets / 2 input posts
Protection: short-circuit, DC, overload, overheat, ultrasonic, RF, voltage peak limit,
Operating Voltage: 110V/220V available
Fusible: F-30A
Consumo de energía (En reposo): <165W
Consumo de energía (Máximo): <5000W
Circuit: Class D
Dimensions (L×W×D): 483mm×420mm×45mm (1U)
Package (L×W×D): 580mm×478mm×73mm
Peso neto: 8.5kg
Peso bruto: 9.8kg
Productos relacionados
Mensaje del producto
Si tiene alguna pregunta, no dude en contactarnos, nos pondremos en contacto con usted lo antes posible.
YINGHUANG ELECTRONIC TECHNOLOGY CO.,LTD
Fabricantes de Micrófono inalámbrico de la producción
Mensaje nosotros
Si tiene alguna pregunta, no dude en contactarnos, nos pondremos en contacto con usted lo antes posible.